Open 24/7 · R350 call-out fee · Price agreed on site before work startsPay by EFT, cash or card
Home and office security

Installing a Safe in an Apartment

In short:

  • A safe that isn't fixed down can be carried out. Makers supply fixings and say what they're for; Yale's, for example, are for concrete and brick only.
  • In an apartment, weight and drilling are building questions. Ask the body corporate first, and get a structural engineer's view for a heavy safe; don't guess at floor loads.
  • Gun owners must use a safe that meets the Firearms Control Regulations (regulation 86, referring to SABS 953-1 and 953-2). Check the current requirements with SAPS; this isn't legal advice.
  • Keep the codes, keys and paperwork somewhere other than the safe. If it won't open, we open and repair safes after seeing proof of ownership.

Decide what the safe is for

The right safe depends on what goes in it. A few questions narrow it down quickly:

Matching the safe to the job
You want to protect…Look for…
Passports, documents, a laptopA compact safe with a fire rating from the maker if fire is a worry
Jewellery, cash, watchesA heavier body and a security grade the maker can document
Firearms and ammunitionA safe that meets the firearm storage regulations (see below)
Things you need fastA lock you can open quickly and reliably: keypad, key or dial

Then think about the lock. Electronic keypads are quick but need batteries; key locks need a key stored somewhere safe; mechanical dials are slower but have no batteries. Whatever you choose, read the maker's manual for how to set and change the code before you close the door for the first time. Yale, for example, tells owners to fit batteries and set the user code with the door open.

Weight, floors and the body corporate

A safe is heavy for its size, and an apartment floor is shared structure. We won't give you a floor-load figure, and you shouldn't take one from a seller's website either. Instead:

  • Ask the body corporate or managing agent before buying a large safe. Many schemes have rules on drilling into floors and walls, and the slab may carry services such as pipes or cables.
  • Get a structural engineer's view for anything heavy, especially in an older building or on a suspended timber floor.
  • Plan the route in. Lift capacity, stair width, door widths and the building's moving rules all matter. Ask building management about booking the lift.
  • Tenants need the landlord's written permission before anything is drilled or fixed.

Section 13 of the Sectional Titles Schemes Management Act requires owners to let a person authorised by the body corporate inspect and maintain shared services in a section, on notice. That's one reason not to fix a safe over a service duct or a pipe run without checking first.

Fixing it down: follow the maker's instructions

An unfixed safe is a box with a handle. Makers expect their safes to be secured and say how:

  • Yale's fitting guide for its safes says to mount the safe in at least two places, on either the wall or the floor, and that the fixings in the box are for concrete and brick only; for any other material you need appropriate fixings.
  • Yale's fire safe guidance recommends securing into brick or concrete, and says that its fire safes can only be floor-mounted because of the fire-protective material inside.
Concrete floor slab Solid wall Safe Anchor bolts through the base Before drilling • Body corporate consent • Weight: ask a structural engineer, not a seller • Maker's fixings for the material you're fixing into • Keep clear of pipes, cables and ducts • Tenants: landlord's consent
Illustration A floor-fixed safe. The number and type of fixings, and whether wall fixing is allowed, come from the maker's instructions for that model.

Points that usually matter in a flat: fix into the structural slab, not a screed or tiled topping alone; keep the safe clear of underfloor heating, pipes and cables; and put it where the door can open fully and you can reach the keypad without contortions. If the instructions call for a professional installer, use one.

If the safe is for firearms, the requirements come from the law, not from preference. Regulation 86 of the Firearms Control Regulations, made under the Firearms Control Act, 2000, requires a firearm that isn't under the licence holder's direct control to be kept in a safe or strong-room that conforms to SABS Standard 953-1 and 953-2, unless the regulations provide otherwise. The same regulation requires the person entitled to the firearm to have exclusive access to the safe, or for their presence and co-operation to be needed to open it, with limited exceptions.

For a lock-away safe, regulation 86(12) lists minimum features, including steel at least 2 mm thick, an effective integral lock, a hinge that keeps the lid shut if the locking pin is removed, and a facility to fix it securely to a wall, a floor or the body of a vehicle.

This is a summary, not legal advice. Regulations are amended from time to time; confirm the current requirements with SAPS or your Designated Firearms Officer before you buy, and keep the safe's paperwork with your licence documents.

What goes wrong, and what makes it worse

  • Codes and keys kept inside the safe, or on a note taped to it. Store them separately and securely.
  • Ignoring low-battery warnings on a keypad safe until it won't open.
  • Repeatedly entering wrong codes. Many electronic safes shut down for a while after several wrong attempts (Onity documents this on its hotel safes), so keep trying and you only wait longer.
  • Drilling or prising a stuck safe yourself. It can destroy the lock and the contents, and turn an opening into a replacement.
  • Fixing into tiles or plasterboard with whatever plugs are in the drawer.

Safe repairs and opening

We're not a safe shop. Safe opening and safe repairs are part of our everyday work, alongside locks, car keys and roller shutters. If your safe's keypad has stopped responding, the lock is stiff, the door won't close properly, or you've lost the key or code, our safe repairs and safe opening services cover it.

Before opening any safe we ask for proof that it's yours or that you're entitled to its contents, and non-destructive methods are tried first. The R350 call-out fee. The technician assesses the job on site and gives you the price before any work starts. Nothing is done until you agree. Payment is by EFT, cash or card, and we're open 24/7.

What to have ready

  • The make and model (often on a label inside the door or on the back) and the manual if you have it.
  • Photos of the front, the keypad or dial, and how it's fixed.
  • What happens when you try to open it: beeps, lights, nothing.
  • Proof of ownership or entitlement: ID plus a receipt, lease or, for a gun safe, your licence documents.
  • Building access: tell the concierge or security a locksmith is coming.

If you run a guest house with room safes, key control for guest houses covers override codes. For questions about costs, see what a mobile locksmith costs in Cape Town. Apartment safes are relevant right across the apartment-heavy parts of the city, whether you need a locksmith in Sea Point, a locksmith in the CBD or a locksmith in Mouille Point. For everything else, start at our mobile locksmith in Cape Town homepage.

Questions

Can I bolt a safe to a wall in my flat?

Only if the maker allows wall fixing for that model and the wall is solid. Yale, for example, supplies fixings for concrete and brick only, and some fire safes are floor-mount only. Ask the body corporate before drilling.

How heavy a safe can my apartment floor take?

We can't say, and nobody should guess. Ask the body corporate or managing agent, and get a structural engineer to look at the floor for a heavy safe.

Does my gun safe have to meet SABS 953?

Regulation 86 of the Firearms Control Regulations refers to SABS Standard 953-1 and 953-2 for firearm safes, with some exceptions. Confirm the current requirements with SAPS; this isn't legal advice.

Need a locksmith to look at it?

If this hasn't solved the problem, our safe repairs & code changes service covers it. We're a mobile locksmith in Cape Town, so we come to your door. Areas where this comes up often include Sea Point, Cape Town City Centre, Mouille Point.

Sources and further reading

Request assistance

Four quick details. We reply by phone or WhatsApp, 24/7. For anything urgent, calling is quickest.

We use these details only to respond to your enquiry. See our privacy notice. Sending this form is a request for contact, not a confirmed booking.

CallWhatsApp